Skip to main content

Author: admin

5 Common Summer Plumbing Problems

Plumbing Issues Homeowners In Mission, B.C. Experience

The summer months are full of activities for each home, whether backyard BBQ’s or family vacations. No matter if you spend the summer at home or away, it is important your home is properly prepared for the season. Many homeowners focus on getting their air conditioner in check, and while that is essential, don’t forget about your plumbing too! In this article, we discuss five common problems homeowners experience with their plumbing in Mission, BC.

1. Clogged Disposal Unit

Hosting a barbeque or another summer gathering means more food preparation alongside more waste. That includes everything from grease, oils, and fatty substances to items not for the garbage disposal (like bones, eggshells, and coffee grounds) passing through it. All of these waste items can clog your garbage disposal and result in plumbing repair in Mission, BC.

2. Backed-Up Sewage Lines

Heavy rainstorms in the spring and summer allow water to penetrate deep underground. If your pipes have cracks or holes, water gets in, along with dirt and rocks that clog the sewage line and allow backflow.

These summer showers also promote growing tree roots that penetrate your pipes, causing a similar concern. A local plumbing company in Mission, BC, such as Rep-Air Heating and Cooling, can inspect your plumbing lines for other imperfections while unclogging your sewer.

3. Washing Machine Overload

Higher temperatures mean more time in nature, which means more dirty clothes and water-drenched swimsuits. That also means more loads of laundry that place constant pressure on washing machines.

Overuse prematurely deteriorates your washer and promotes clogs from detergent and other improperly drained contaminants. These contaminants lead to overflow or a pipe leak that needs professional plumbing repair to prevent safety issues.

4. Sprinkler Malfunctions

Whether your sprinklers are for a greener-looking yard or your kids’ summertime fun, the holes in the sprinkler head easily clog with kicked-up dirt, grass clippings, and other debris. Use a wet cloth to remove imperfections, but if deeper, trust a Rep-Air specialist to remove the culprits. Prevent future clogs by:

  • Not watering in windy weather
  • Placing a filter on your sprinkler system
  • Calling for regular maintenance once a year for debris removal

5. Toilet Clogs

Toilet clogs occur when non-flushable items enter the drain, like excessive toilet paper, baby wipes, diapers, and hygiene products. When you have house guests and the kids are on summer vacation, there are more people to remind of this rule. If they forget, plunge the drain free and consider snaking it, but for tougher clogs, a professional will:

  • Use a longer auger for deeper clogs
  • Use a safe solution to break down the waste
  • Hydrojet with high water pressure

Contact Us For Plumbing Repair In Mission, BC!

The Rep-Air team of professionals specializes in HVAC, plumbing, and electrical services in Mission, BC and surrounding areas. Our five-star technicians conduct efficient services and repairs for all plumbing problems the summer throws your way. Rather than take on a dangerous DIY project, call 833-242-6416 for a plumbing repair in Mission, BC, and surrounding areas today!

Things To Do This Summer In Abbotsford

As the weather heats up in Abbotsford, finding fun things to do with your family makes the season that much more memorable. With so much to experience, a staycation may be better than leaving town! Use this summer as the perfect time to familiarize yourself with local events and businesses, create new traditions, and enjoy unique experiences.

When not providing AC repair in Abbotsford, B.C., you can find the Rep-Air team enjoying the many local activities to do this summer! Below we have provided our team’s favorite summer activities in Abbotsford, B.C.

BerryFest

Celebrate local berries in Abbotsford with this activity-packed event, held this year on July 8th, 2023. The date varies from year to year, so look it up before you head out! At BerryFest, you can check out the carnival rides, play games, and take on local bakers in the berry pie competition and see where you stand.

Bard In The Valley

This July, Bard in the Valley provides entertainment to the whole family with Shakespearean performances at various locations throughout the town. For the 2023 summer shows, the cast will perform Cymbeline at Township 7 Winery, Douglas Park, and Bakerview Farms. When we’re not working, you can catch us supporting local businesses, actors, and actresses by watching one of the Bard’s last plays.

Willband Creek Park

If you want to get your family into bike rides, Willband Creek Park in Abbotsford offers a 1.5-mile loop perfect for walking or riding. The trail takes you along ponds, marshes, and grasslands unique to British Columbia, where you can see plenty of local flora and fauna. When we visit the park, we like to take our dogs, though you have to remember to put them on a leash.

Twilight Drive-In Theatre

When night falls in Abbotsford over the summer, our team enjoys taking their families to the Twilight Drive-In Movie Theatre. Join us in sitting under the stars while newly-released films play on an enormous outdoor screen. Furry family members can come, too, and you can pick up tasty snacks from the concession stand before and during the show.

Banter Ice Cream

One of our favorite spots in town for a sweet treat after a day of AC repair in Mission, B.C. is stopping at Banter Ice Cream. With unique tastes like cinnamon toast crunch, lemon curd, and salted lime margarita, everyone in the family can enjoy the smoothest ice cream in town. If you’d like to enjoy these sweet treats at home, you can pre-order pints of your favorites and come pick them up.

The Abbotsford International Airshow

As one of the biggest events in Abbotsford, you’re sure to find families hanging out at the Abbotsford International Airshow. Aerial performances, food trucks, craft beer, and more await to entertain you at the end of summer. Mark this event on your next road trip excursion around British Columbia if you visit instead of living in the area.

Cool Off After Fun in the Sun in Abbotsford, British Columbia

Spending all day out in town can make you hot and tired, so when you return home to a warm, muggy house, you need to get your AC working again. Enjoy a cool home with expert AC repair in Abbotsford, B.C. and surrounding areas by calling Rep-Air Heating & Cooling at (833) 242-6515!

Ways To Improve Your Home’s Air Quality

As the weather heats up, many are spending time outdoors in Mission at places such as Steelhead Falls and Cedar Ridge Golf Course. While many enjoy soaking in the warm temperatures, spending time outside can trigger allergies due to spring pollen. Your home should be an escape from the uncomfortable health symptoms spring allergies can cause, but did you know your home could be the source of allergies as well? In this blog, we discuss indoor air quality in Mission, BC and ways lower pollutants inside your home.

What Is Indoor Air Quality?

Did you know indoor air is often more polluted than outdoor air? According to the EPA, Americans spend about 90% of their time indoors, where the concentrations of some pollutants are higher than ones outdoors. This means we spend a majority of our time breathing whatever pollutants are floating around your home, office, or building’s air. It is important for our health to maintain positive indoor air quality, which measures the quality of air and pollutants indoors.

Why Is Indoor Air Quality Important?

Do you know what you are breathing inside your home? Common indoor pollutants include mold, mildew, pet dander, dust, asbestos, VOC’s, bacteria, and much more. A Rep-Air technician can perform indoor air quality testing in Mission, B.C. to identify specific pollutants in your home’s air and determine the best solution! While everyone is susceptible to poor indoor air quality health effects, the most vulnerable are young children, older adults, and people who previously struggled with respiratory diseases such as asthma. Breathing in harmful pollutants can result in both short-term and long term health effects, such as:

  • Irritated nose, throat, and eyes
  • Dry/cracked skin
  • Dizziness
  • Headaches
  • Fatigue
  • Respiratory diseases
  • Heart disease
  • Cancer

The summer season brings a variety of fun activities and vacations,and it is important you and other residents are free of uncomfortable health symptoms such as the ones above! It is one of the Rep-Air Heating and Cooling team’s top priorities to keep you healthy each season, and we can help with our indoor air quality services in Mission, B.C. and surrounding areas!

What Causes Poor Air Quality?

Many homeowners do not realize how day-to-day activities, home appliances, and products contribute to poor indoor air quality. We don’t expect you to be the HVAC experts, that is what we are here for! Below are factors that cause poor air quality in Mission, B.C. and surrounding areas.

  • Combustion Appliances
  • Cleaning Products
  • Fragrances
  • Indoor Animals
  • Building Materials
  • Humidity
  • Tobacco Residue

Ways To Improve IAQ

It is important to take action to improve indoor air quality to maintain you and other resident’s health each season. The Rep-Air Heating and Cooling team offers a variety of indoor air quality services to protect your health and home. Below are ways the Rep-Air team can help improve indoor air quality in Langley, B.C. and surrounding areas.

Additionally, there are simple ways for homeowners to positively contribute to their home’s indoor air quality such as:

  • Regularly Change Air Filters
  • Groom Pets Outdoors
  • Frequently Dust
  • Control Humidity

We are here to keep you healthy this spring and summer season! Give us a call to schedule indoor air quality services in Abbotsford, B.C. and surrounding areas to maintain clean air and good health!

Reasons To Purchase A HVAC Maintenance Plan

What are you most looking forward to when the warm weather is finally here to stay? Many locals enjoy sitting on Mission Springs Brewing Company’s patio while enjoying a craft brew, while others enjoy activities at Hayward Lake. Due to the many festivities the warm weather brings, it can be easy to forget properly preparing aspects of your home, such as your air conditioner, for summer. Many homeowners overlook scheduling AC maintenance until they face the consequences of an uncomfortable breakdown. In this article, we will discuss various reasons and benefits to invest in a HVAC maintenance plan in Mission, B.C.

What Is A HVAC Maintenance Plan?

It is common to think “If it isn’t broken, why fix it?” However, there are numerous reasons to schedule HVAC maintenance even though your heating and cooling systems seem to be working just fine. HVAC maintenance is a routine service performed each spring and fall season to ensure your heating and cooling system is working efficiently and effectively. We understand life gets busy and there are a variety of things on a homeowner’s to-do list, which makes it difficult to remember to schedule heating and AC maintenance in Mission, B.C. and surrounding areas. At Rep-Air, we offer multiple HVAC maintenance plans so you can save money and never forget to service your HVAC system again!

We proudly offer four different HVAC maintenance plans to help fit your budget and home needs. Each plan offers a variety of beneficial services for a monthly fee, such as:

  • Repair Warranties
  • Maintenance Visits
  • Annual Service Reminders
  • Priority Service
  • Discounted Fees & Services
  • And more!

Our team will remind you of services needed and keep your home comfortable year-round. Visit our website to view the details of each plan and select the perfect one for you and your home!

Why Would I Need An HVAC Maintenance Plan?

Picture this: It is snowing in Mission, and your heating system is no longer producing warm air into your home. A Rep-Air technician is on the way to identify the problem and quickly provide the best solution, but your home is becoming colder by the second. Your technician reveals the source of the problem was a faulty blower motor that could have been avoided with regular maintenance. Heating maintenance could have caught the problem early before it resulted in a breakdown and costly repair. We promise – we have seen scenarios similar to this each winter and summer season!

Much like a doctor’s check up or oil change for your car, your heating and cooling system needs to be looked at by a professional each year. HVAC systems can operate with underlying issues, which can lead to high utility bills, costly repairs, or an unexpected breakdown. Scheduling preventative maintenance for both your heating and cooling units is necessary to maintain home comfort and unit efficiency. However, we understand it can be difficult to remember HVAC maintenance each spring and costly upfront for some. Let the professionals at Rep-Air take the stress off your shoulders by reminding you when your heating and cooling system is due for service and spreading out the maintenance costs each month! Our HVAC maintenance plan can help you stay on track with your budget and take one less thing on your home’s to-do list. Additionally, our maintenance plans can offer you more home savings and ensure you never experience an uncomfortable situation.

5 Benefits Of A HVAC Maintenance Plan

Regular HVAC maintenance can provide various advantages for you and your home, however, homeowners must remember to do so each spring and fall. A maintenance plan can ensure you never miss a maintenance service and keep your heating and cooling system at maximum efficiency. If you take care of your HVAC system, it will take care of you in return. Below are five benefits of purchasing a HVAC maintenance plan in Mission, B.C. and surrounding areas.

  • Fewer Repairs
  • Lower Utility Bills
  • Peace Of Mind
  • Increased Lifespan
  • Improved Home Comfort & Safety

Fewer Repairs

HVAC systems are complex systems and require many components to function properly. During HVAC maintenance, a Rep-Air technician will perform a thorough inspection of each component of either your heating or cooling unit depending on the season. Sometimes parts can malfunction and the system can continue operating with the malfunction until it results in a breakdown. Our trained technicians will catch current problems ahead of time and perform multiple preventive tasks to result in fewer repairs.

Lower Utility Bills

Underlying issues and malfunctions with a heating and cooling system can lead to it using more energy to operate. The system using more energy decreases its efficiency and increases your utility costs each month. A maintenance plan ensures your HVAC system operates effectively and avoids skyrocketing utility bills throughout the year.

Peace Of Mind

Many homeowners take vacations and leave their homes in the summer and bundle up in their warm home during the chilly winters. Regardless of the season, it is important to know your HVAC system is working properly and will not experience any unexpected situations. HVAC maintenance plans provide homeowners with peace of mind that their heating and cooling systems are working effectively throughout all of life’s activities and temperatures.

Increased Lifespan

If well maintained, your heating and cooling systems will live up and possibly exceed their expected lifespans. Frequent repairs, wear and tear, and lack of maintenance all contribute to HVAC systems needing to be replaced earlier than expected. A maintenance plan with Rep-Air will keep you updated on the life expectancy of your system and prevent issues that could shorten the unit’s lifespan.

Improved Home Comfort & Safety

Preparing your air conditioner for the summer and heating unit for the winter with HVAC maintenance can ensure your home remains comfortable throughout the year. Your HVAC system can experience large workloads due to the weather and cause various stressful situations if not properly prepared. HVAC maintenance plans can help improve your home’s comfort, while also improving indoor air quality and safety. Some air conditioners and heating units work to maintain proper humidity levels and catch harmful pollutants floating through the air.

We can help you stay comfortable in your home each season with our HVAC maintenance plans in Mission, B.C. and surrounding areas. To learn more about what each plan entails or begin investing in your comfort, give us a call at (778) 728-1476 or visit our website today!

Why Is My Water Heater Leaking?

Our homes rely on water heaters for a variety of tasks, such as washing hands, bathing, laundry, and washing dishes. Many homeowners underestimate the importance of a water heater until they experience discomfort from a breakdown. Like many appliances, water heaters can malfunction and need repair every now and then. A common water heater issue is the system leaking and causing discomfort and damage. In this blog, we discuss causes of a leaking water heater in Mission, B.C. and surrounding areas.

How Do Water Heaters Work?

To understand what causes water heaters to leak, it is important to understand how the unit operates. Most water heaters run on either gas or electricity to generate heat. Water heaters typically use a storage tank, located in a closet, garage, or another tucked away area. The process begins by water entering the tank from the main water supply. The heating element is located at the bottom of the water heater tank and begins heating the water. As water becomes heated, it rises to the top of the tank and is easily accessible. When needed, hot water is ready at the top of the tank and distributed into your home when turned on.

What Should I Do If My Water Heater Is Leaking?

Due to water heaters being located inside your home, it is important to catch water leaks before too much damage is caused. Water damage can ruin floors, walls, and other personal items. We recommend regularly checking on the status of your water heater to ensure it is not leaking in your home. If you notice your system is leaking, the first thing you should do is turn off the main water supply to avoid more water from leaking. From there, give one of our trained technicians a call. While we are on the way, we recommend cleaning up as much water as you can to avoid further water damage. We can quickly identify the cause of the water leak and help determine the best solution for your home!

What Causes Water Heaters To Leak?

In the inconvenient event your water heater begins leaking, we have you covered at Rep-Air! Our technicians can help you find a cost effective and long lasting solution for your home with our water heater repair and replacement services in New Westminster, B.C. and surrounding areas. Below are five common causes of water heater leaks.

  • Cracked Storage Tank
  • High Pressure
  • Bad Drain Valve
  • Faulty Temperature & Pressure Valve
  • Old Tank

Cracked Storage Tank

While water heaters are designed to effectively hold hot water, the constant stress can cause cracks over time. Heat causes water to expand and can result in small cracks within the tank. If your storage tank is cracked, it will likely need to be replaced to best protect your home from future damage!

High Pressure

Water heaters experience large amounts of pressure due to the process of heating and handling water. Pressure can occur due to hot water producing steam and taking up space in the storage tank. The steam can become trapped and create cracks, which causes water leaks. Additionally when the water temperature is set too high, pressure rises and risks creating more cracks.

Bad Drain Valve

The purpose of a drain valve is for a technician to empty the tank during maintenance or repairs. If the valve loosens or breaks over time, it can cause water to leak. In some cases, homeowners can just replace the drain valve, but others require replacement of the entire water heater system. We value honesty at Rep-Air Heating and Cooling and will always provide truthful information to help you make the right decision for your home!

Faulty Temperature & Pressure Valve

If your water heater is leaking, the temperature and pressure valve, also known as T&P valve, could be the cause. This component works to regulate temperature and pressure within the water heater, and can malfunction just like any other part. If the T&P valve is faulty, pressure and temperature can rise and lead to cracks as we previously mentioned.

Old Tank

Much like any home appliance, the time will come when your water heater will need to be replaced. Well maintained water heaters can last anywhere between 15-20 years. As the system ages, it experiences wear and tear on all components and can leak more frequently. If your home has an older water heater, we recommend paying attention to the following warning signs to avoid a water leak or breakdown:

  • Rusty Water or Tank
  • Frequent Repairs
  • Loud Noises
  • Little/No Heat Within Water

How To Prevent Your Water Heater From Leaking

There are a variety of ways to ensure your water heater remains working efficiently and effectively. Water damage caused by water heater leaks can be a stressful situation, and we are here to help keep your peace of mind. Below are five tips to prevent your water heater from developing a leak.

  • Perform Regular Maintenance With Rep-Air
  • Avoid High Water Temperatures
  • Test The T&P Valve
  • Be Aware Of Rust
  • Regularly Drain & Flush The Tank

We have you covered at Rep-Air during unpredictable situations, such as a water heater leaking. Our trained technicians have seen it all and can quickly restore your home comfort with our water heater repair and replacement services in Mission, B.C. and surrounding areas. Give Rep-Air Heating and Cooling a call if you are experiencing trouble with your water heater!

How To Prevent Frozen Pipes

The winter season can bring many things such as snow days, family traditions, and unfortunately frozen pipes. Frozen pipes can be a homeowners worst nightmare due to the discomfort and damage it can cause. Our customer’s home comfort is our top priority every season, especially when temperatures are low. In this blog, we discuss everything you need to know about frozen pipes and how to prevent the situation.

Tips To Prevent Frozen Pipes

Before the temperatures drop, we recommend preparing your pipes for the cold weather. Without proper preparation, your pipes are more likely to freeze and burst. Below are 5 tips to preventing frozen pipes this winter in Mission and surrounding areas.

  • Insulate Pipes & Unheated Areas
  • Open Cabinet Doors
  • Maintain A Consistent Thermostat Temperature
  • Drip Faucets
  • Disconnect Outside Hoses

Insulate Pipes & Unheated Areas

One of the best ways to prevent frozen pipes is to install insulation around them. Pipe insulation is fairly inexpensive and can be found at most home improvement stores. Additionally, we recommend insulating unheated areas, such as crawlspaces, attics, and basements. Insulation will not only keep unheated areas a more comfortable temperature, but protect your pipes and personal belongings from damage.

Open Cabinet Doors

When temperatures drop, we recommend opening cabinet doors with pipes underneath. Cabinets block heat from entering, which causes an unheated environment for pipes to freeze. Opening cabinets allows heat flow and can help prevent frozen pipes. Be sure to remove harsh chemicals underneath cabinets if your home has animals or small children.

Maintain A Consistent Thermostat Temperature

While it may be more comfortable or save money to lower temperatures at night, we do not recommend doing so when temperatures drop below freezing. Keeping your home a consistent, warm temperature can help prevent frozen pipes and save yourself from a big headache.

Drip Faucets

If the forecast shows temperatures below freezing, we recommend letting your faucets drip overnight. Letting your faucets drip creates a constant flow of water and relieves pressure building up between the pipe and ice blockage.

Disconnect Outside Hoses

Once you are finished gardening or swimming for the season, we recommend immediately disconnecting all outdoor hoses. Even though the hoses are not in use, water inside and within the connected pipes can still freeze. Close any shut-off valves that supply outdoor hose bibs and drain excess water inside each hose. Additionally, consider purchasing faucet covers for outdoor spigots to further prevent frozen pipes.

Frozen Pipe FAQ

Frozen pipes can raise many homeowner questions. We are here to help answer those questions! Below are 10 commonly asked questions about frozen pipes.

What causes frozen pipes?

As most know, water freezes at 32 degrees Fahrenheit. When temperatures drop below 32 degrees, your pipes have a chance of freezing.

What pipes are more likely to freeze?

Most pipes have a chance of freezing when temperatures drop. However, certain pipes around your home have a higher chance of freezing than others. Below we listed pipes that freeze more frequently.

  • Pipes in unheated areas such as crawlspaces, garages, basements, or inside cabinets
  • Pipes with no insulation
  • Outdoor pipes connected to hoses, swimming pools, and sprinklers
  • Pipes on exterior walls

What causes frozen pipes to burst?

As water freezes, it expands. The expansion can create extra pressure inside the pipes and cause the metal or plastic container to burst.

What temperatures cause pipes to freeze?

Pipes risk freezing when temperatures are 32 degrees or lower. However, pipes most commonly freeze when temperatures drop to 20 degrees or lower.

How long does it take for pipes to freeze?

Depending on the temperature, pipes can freeze quickly or slowly. A general rule of thumb is temperatures need to be below 20 degrees for six consecutive hours before water inside pipes freeze.

Can my pipes freeze without bursting?

Frozen pipes do not always burst, however, we do not suggest waiting the situation out. If you notice your pipes are frozen, we suggest calling a Rep-Air technician to quickly help avoid potential home damage and discomfort.

How do I tell if my pipes are frozen?

Frozen pipes can be easy to identify in some cases, while others show signs once burst. When temperatures drop below freezing, we encourage homeowners to pay attention to the following signs to identify frozen pipes:

  • Limited or lack of water
  • Bulging
  • Smelly water
  • Unusual sounds
  • Condensation on pipes
  • Surface cracks

If you notice any of these signs, give a Rep-Air technician a call to quickly prevent any further plumbing issues!

What are ways to thaw frozen pipes?

If you notice your pipes are frozen, we recommend taking immediate action to prevent them from bursting. Thawing frozen pipes can create more pressure inside if done incorrectly. We recommend exposing the frozen pipe to a heat source, such as:

  • Opening cabinet doors to improve heat flow
  • Wrapping in warm towels
  • Utilizing a portable heater in the area and safely monitoring
  • Call a Rep-Air technician

What do I do if my pipes freeze?

If you notice your pipes are frozen, we recommend taking precautionary measures in case the pipes burst. Below we have listed what to do if your pipes freeze in New Westminster and surrounding areas.

  • Shut off water
  • Allow heat to ventilate near pipes
  • Examine pipes for leaks or cracks
  • Call a trusted Rep-Air technician

What do I do if my frozen pipes burst?

If your frozen pipes burst, we suggest turning off the water source and immediately calling a Rep-Air professional. Next, find a short term repair to slow the water leakage such as epoxy putty, pipe putty, electrical tape, or anything else temporarily. While you wait for one of our technicians to arrive, we recommend cleaning up as much water as you can to prevent further damage. If possible, place a bucket to collect water leaking and use towels to soak up water where you can.

Let us help prevent frozen pipes in your home in Mission, B.C. At Rep-Air, we offer a variety of plumbing services to maintain your home comfort and avoid inconvenient situations. Give us a call for plumbing services in Fraser Valley and surrounding areas today!

5 Signs It’s Time To Replace My Furnace

As the winter season sets in, it is important your home has a reliable furnace. Investing in a new furnace is an important decision for your home and should be evaluated carefully. New furnace systems can heat your home more efficiently, improve airflow, and provide many other benefits. If you are evaluating replacing your furnace, we are here to help make your decision a breeze. In this blog, we list common signs it is time to replace your furnace in Mission!

How Do Furnaces Work?

In order to determine whether your furnace needs to be replaced, it is important to have a basic understanding of how furnaces work. There are four main types of furnaces: natural gas, oil, electric, and propane. The heat exchanger is warmed up by the heat, and transfers it onto cold incoming air. Finally, the blower pushes the heat into the ductwork to be distributed throughout your home.

Signs Your Furnace Needs To Be Replaced

Although installing a new furnace can be expensive upfront, it could be the most cost effective decision down the road. Replacing your furnace is an investment in your comfort and will easily be worth the money. As long as proper maintenance is given, replacing your furnace will provide comfort and benefits for years to come. However, how do you know when it is the right decision to replace your furnace rather than repair? Below we have provided 5 signs your furnace needs to be replaced to make your decision easier!

  • Furnace Age
  • High Energy Bills
  • Visible Damage
  • Short Cycling
  • Frequent Repairs

Furnace Age

A well-maintained furnace should last at least 15 to 20 years if properly cared for. Performing regular maintenance and being attentive with repairs will expand its lifespan. When moving to a new home with a furnace already installed, it is important to ask the age and history of the unit. This knowledge will help track its lifespan and ensure proper maintenance is given. The older your furnace is, the less energy-efficient it is likely to be. If your furnace is older than 20 years or you have noticed a significant decline in its performance, replacement is likely the best option for your home.

High Energy Bills

A rise in your home’s energy expenses is a tell-tale sign that there is a problem with your furnace. High energy bills can indicate your furnace is using more energy to operate than it should be. We recommend collecting energy bills from each year and comparing the differences.
High energy bills can add up over time, and replacing your furnace can save money over time.

Visible Damage

Like most things, furnaces are subject to wear and tear over the years. However, be sure to pay attention to visible damage such as:

  • Rust
  • Visible cracks
  • Streaks of soot

While it is normal for appliances to show indications of wear and tear, such indicators might point out that it is time to replace your equipment. Paying attention to these signs can help you understand what is causing them and if they indicate a more serious issue!

Short Cycling

It is normal for your furnace to cycle on and off during operation. However if your furnace is cycling frequently or all the time, there is likely an internal issue. One of our expert technicians can determine if the cause of short cycling is an easy fix or indicates furnace replacement.

Frequent Repairs

If your furnace experiences frequent repairs, replacement could be your best option. Continuing to repair a dying furnace is similar to putting a bandage over a much larger issue. Not only will you experience frequent discomfort, but repair costs will add up over time. Eventually, you may pay the cost of a furnace in repairs until your furnace finally gives out. Replacing rather than repairing may be better for you and your home in the long run!

Contact a Rep-Air Technician

Consider these tips when deciding if it is time to replace your furnace. One of our experienced technicians can help determine the best decision for you and your home. At Rep-Air, we value honesty and reliability, and always make decisions with your best interest at heart. We are here to help keep you warm and cozy this winter, so give us a call for furnace replacement in Mission!

Is Your Furnace About to Breakdown? Watch For These Warning Signs

Your furnace is a crucial part of your home – it keeps you warm during the winter and helps to keep your energy bills down. So what do you do if you think your furnace might be on the brink of breaking down? Watch for these warning signs! If you see any of these signs, it’s time to call in a professional to take a look at your furnace and see if it needs repairs or replacement.

What Is The Typical Lifespan of A Furnace?

The average lifespan of a furnace is around 10-15 years. However, this can vary depending on the type of furnace, the quality of the installation, and how well it’s maintained. If you’re furnace is reaching the end of its lifespan, or if you’re seeing any of the warning signs listed below, it’s time to start thinking about calling a professional Abbotsford furnace repair company to come take a look.

4 Signs That Your Furnace Is About To Break

There are four telltale ways to know if your furnace is about to bite the dust. Many of which can be spotted before any major repairs are needed, so be on the lookout for these indicators:

  1. Your furnace is making strange noises
  2. The furnace isn’t producing the desired amount of heat
  3. There are odd smells coming from your vents
  4. Furnace is running constantly without shutting off

We will break down more information about each warning sign down below.

Furnace is Making Strange Noises

One of the biggest warning signs that your furnace is about to break down is if it’s making strange noises. From grinding and rattling to squealing and humming, any sound other than a quiet hum could be a sign that something isn’t quite right with your furnace.

Your Furnace Isn’t Producing Enough Heat

Another warning sign is if your furnace isn’t producing enough heat. If the air coming out of your vents isn’t as warm as it used to be, or if certain rooms in your home are colder than others, this could indicate a problem with your furnace.

Strange Smells Coming From Furnace/Vents

You’ll also want to watch for odd smells coming from your furnace – anything from burning plastic or metal to gas-like odors – all of these could mean there’s an issue with your furnace.

Your Furnace Is Running Non-Stop

Finally, if you notice that your furnace is running continuously without shutting off, this could be a sign of a problem. It’s normal for your furnace to cycle on and off throughout the day, but if it’s consistently running without stopping, it’s time to get help from an HVAC professional.

By being aware of these warning signs and paying attention to any changes in how your furnace is performing, you can make sure that you catch any potential issues before they become major problems – saving yourself time and money down the line! If you’re concerned about whether or not your furnace is about to break down – don’t hesitate to call in a professional for a furnace inspection. They’ll be able to diagnose the issue and provide you with an accurate assessment of your furnace’s condition. Don’t wait until it’s too late – be proactive and watch for these warning signs so you can stay warm all winter long!

Call Rep-Air Heating & Cooling For A Proper Furnace Diagnostic!

If you are unsure about what is causing your furnace to not work efficiently, give us a call! Our team is here to help answer any questions you may have about your furnace and to provide thorough diagnostic and repairs as needed. To get started, call our office at 778-728-1476.

What To Do If Your Furnace Is Blowing Cold Air

Furnace Isn’t Working? Check Out These Helpful Tips!

Have you recently turned on your furnace for the first time and noticed that it is blowing cold air? Have no fear. This can be common for homeowners in Abbotsford, and we have a few suggestions to try before you throw in the towel and call an Abbotsford furnace repair company.

The common reasons that furnaces don’t produce warm air are:

  • Dirty furnace filter that needs to be replaced
  • Vents are shut or are blocked by debris
  • Pilot light went out
  • Furnace is broken (worst case scenario)

Continue reading to see how you can continue diagnosing your furnace problems.


Related Article: How To Prep and Start Up Your Furnace Safely


Check to see if the furnace filter is dirty and needs to be replaced

One of the first things you should do if you notice your furnace isn’t working properly is to check the furnace filter. A dirty furnace filter can restrict airflow and cause your furnace to overheat, which can lead to a variety of problems, including a lack of warm air being circulated throughout your home. A furnace filter should be replaced every 1-3 months, depending on the type of filter you have. If you have a reusable filter, be sure to clean it according to the manufacturer’s instructions before placing it back in your furnace. If you have any questions about furnace filters or replacing them, be sure to consult your furnace’s owner’s manual or contact a professional for assistance.

Make sure all the vents in your home are open and that nothing is blocking them

Your home’s ventilation is important for many reasons. It helps to regulate indoor air quality, preventing the build-up of harmful pollutants. It also helps to control moisture levels, preventing the growth of mold and mildew. And, in the winter, it helps to prevent freezing pipes by circulating warm air throughout your home. To ensure that your home’s ventilation is working properly, make sure that all of the vents are open and unobstructed. Check frequently to ensure that nothing has fallen or been placed in front of the vents, as this can impede the flow of air and cause problems down the line. By taking these simple steps, you can help to keep your home healthy and comfortable all year long.

Turn on the furnace switch (usually located in the basement or garage) and check to see if the pilot light is lit

Before you can begin using your furnace for the winter, you need to make sure that it is in good working order. One of the first steps is to turn on the switch (usually located in the basement or garage). Once you have done this, check to see if the pilot light is lit. If it is not, then you will need to follow the instructions on your furnace to relight it. Once the pilot light is lit, you can turn up the thermostat to your desired temperature and enjoy the warmth of your furnace all winter long.

If the furnace still isn’t working, call a professional Abbotsford HVAC company to come take a look at it

If your furnace still isn’t working properly, it’s time to call in a professional. A qualified technician will be able to diagnose the problem and make the necessary repairs. In most cases, a simple tune-up will do the trick. However, if the furnace is very old or damaged, it may need to be replaced. The technician will be able to advise you on the best course of action. In either case, don’t delay – a broken furnace can be a serious hazard. So call a professional today and get your furnace back up and running safely and efficiently.

Turn To The Team at Rep-Air Heating & Cooling!

If your furnace isn’t working, don’t panic. There are a few things you can do to try to fix it before calling in a professional. Check the filter to see if it’s dirty and needs to be replaced, make sure all the vents are open, and turn on the furnace switch. If none of those things work, give Rep-Air Heating & Cooling a call today to schedule service. We’ll have your furnace up and running in no time!

Tips To Keep Your Air Filter Clean

The fall season brings allergies for some but for others, the answer to their allergy symptoms lies within the walls of their home. If your HVAC system’s air filter remains unchanged, this can lead to poor air quality and issues with the system itself. Air filters are an important part of your system and must be switched every couple of months. They are responsible for keeping larger particles out of your HVAC system and protecting it from harm, in addition to keeping dust and pollen out.

5 Things You Should Do To Maintain A Clean Filter

A big part of ensuring that your HVAC system is running smoothly and efficiently is to keep your air filter clean year-round. We recommend switching out your air filter at least every 90 days for best performance. Doing this will bring many benefits to the table such as improved air quality and extending the lifespan of your HVAC unit. Below are some helpful tips to keep your system’s air filter clean.

  • Choose the right size and type of filter
  • Clean the area around it
  • Consider installing an air filtration system
  • Keep track of changing dates
  • Switch to pleated filters

Choose The Right Size And Type Of Filter

Yes, you heard that right! Unfortunately, no air filter is a one-size fits all which is why it is very important for homeowners to become familiar with their system’s air filter. So, don’t just go and buy any filter without checking first.

A simple way to do this is to conduct a visual inspection. Most filters come labeled with two size measurements that can be found along the filter’s side. Often there is a ‘nominal’ size written in big print, and an adjacent ‘actual’ size written in smaller letters. A good way to measure your current filter’s performance is by looking at its minimum efficiency reporting value, or MERV. MERV reports a filter’s ability to capture larger particles between 0.3 and 10 microns (µm). The higher the MERV rating, the better the filter is at trapping specific types of particles. Based on filter performance along the MERV scale, your home will most likely require a MERV 5 to 8 filter. If you don’t have any allergies or pets, MERV 1 to 4 is acceptable. However, if you have severe allergies, asthma, or lung problems, you should consider installing MERV 10 for additional filtration.

It is important to note that the higher the MERV, the smaller the filter pores. While this traps more pollutants, it also can cause your HVAC system to work harder to push air through. Our expert technicians can help perfectly match an air filter to your system and avoid it becoming overloaded. Give us a call to help select the right air filter for your home in Mission!

Clean The Area Around the Filter

The first protective measure in air filter maintenance is to keep the space around the system clean. Vacuum or wipe away leftover dust accumulation on the system’s external panels before and after replacing the filter as part of your cleaning routine. This practice enhances filter lifetime and performance, allowing it to successfully combat invisible allergens and pollutants.

Consider Installing An Air Filtration System

In recent years, air filtration systems have increased in popularity due to their ability to improve a space’s air quality levels. Installing an air filtration system in your home or office will help remove all sources of dust particles, pet dander, germs and other harmful contaminants that oftentimes contribute to the clogging of air filters. The best air filtration system for your space of choice will be determined by your unique preferences. We recommend you to speak with an expert to determine the best solution for you. At Rep-Air Heating & Cooling, we offer air filtration system services in Mission and surrounding areas and are happy to help you determine the most suitable filtration system for your home.

Keep Track of Changing Dates

Although this tip might seem silly, keeping an ongoing record of the dates when you replaced the filter as a maintenance reminder is key. A smart hack is to write the date of their last filter change on the filter itself to help them keep track. Doing so not only keeps note of when the filter has to be changed, but it also provides details on your system’s current performance. If the time between changes is shorter than usual, this might indicate a problem with the unit or ventilation system that you aren’t aware of.

Consider Switching To Pleated Filters

While fiberglass air filters will do the job, pleated air filters can be superior in most cases. Pleated air filters absorb smaller particles and are less prone to clog over time. Additionally, pleated filters are oftentimes biodegradable or reusable, making them more environmentally friendly, and their deeper pleats provide greater surface area to filter airborne pollutants.

Contact a Rep-Air Technician

Let us help ensure your home’s air quality remains high and HVAC-related costs remain low.
Give us a call at 1-778-728-1476 with any questions regarding your air filters in Mission. We are here to help keep you safe, comfortable, and breathing easy this season!