What To Do If Your Furnace Is Blowing Cold Air


Published on: November 20, 2022

IMPORTANT NOTE: . Our company is located in British Columbia, Canada. If you are reading this article in another location, we hope you enjoy the information, but unfortunately we cannot service you. 

Furnace Isn’t Working? Check Out These Helpful Tips!

Have you recently turned on your furnace for the first time and noticed that it is blowing cold air? Have no fear. This can be common for homeowners in Abbotsford, and we have a few suggestions to try before you throw in the towel and call an Abbotsford furnace repair company.

The common reasons that furnaces don’t produce warm air are:

  • Dirty furnace filter that needs to be replaced
  • Vents are shut or are blocked by debris
  • Pilot light went out
  • Furnace is broken (worst case scenario)

Continue reading to see how you can continue diagnosing your furnace problems.


Related Article: How To Prep and Start Up Your Furnace Safely


Check to see if the furnace filter is dirty and needs to be replaced

One of the first things you should do if you notice your furnace isn’t working properly is to check the furnace filter. A dirty furnace filter can restrict airflow and cause your furnace to overheat, which can lead to a variety of problems, including a lack of warm air being circulated throughout your home. A furnace filter should be replaced every 1-3 months, depending on the type of filter you have. If you have a reusable filter, be sure to clean it according to the manufacturer’s instructions before placing it back in your furnace. If you have any questions about furnace filters or replacing them, be sure to consult your furnace’s owner’s manual or contact a professional for assistance.

Make sure all the vents in your home are open and that nothing is blocking them

Your home’s ventilation is important for many reasons. It helps to regulate indoor air quality, preventing the build-up of harmful pollutants. It also helps to control moisture levels, preventing the growth of mold and mildew. And, in the winter, it helps to prevent freezing pipes by circulating warm air throughout your home. To ensure that your home’s ventilation is working properly, make sure that all of the vents are open and unobstructed. Check frequently to ensure that nothing has fallen or been placed in front of the vents, as this can impede the flow of air and cause problems down the line. By taking these simple steps, you can help to keep your home healthy and comfortable all year long.

Turn on the furnace switch (usually located in the basement or garage) and check to see if the pilot light is lit

Before you can begin using your furnace for the winter, you need to make sure that it is in good working order. One of the first steps is to turn on the switch (usually located in the basement or garage). Once you have done this, check to see if the pilot light is lit. If it is not, then you will need to follow the instructions on your furnace to relight it. Once the pilot light is lit, you can turn up the thermostat to your desired temperature and enjoy the warmth of your furnace all winter long.

If the furnace still isn’t working, call a professional Abbotsford HVAC company to come take a look at it

If your furnace still isn’t working properly, it’s time to call in a professional. A qualified technician will be able to diagnose the problem and make the necessary repairs. In most cases, a simple tune-up will do the trick. However, if the furnace is very old or damaged, it may need to be replaced. The technician will be able to advise you on the best course of action. In either case, don’t delay – a broken furnace can be a serious hazard. So call a professional today and get your furnace back up and running safely and efficiently.

Turn To The Team at Rep-Air Heating & Cooling!

If your furnace isn’t working, don’t panic. There are a few things you can do to try to fix it before calling in a professional. Check the filter to see if it’s dirty and needs to be replaced, make sure all the vents are open, and turn on the furnace switch. If none of those things work, give Rep-Air Heating & Cooling a call today to schedule service. We’ll have your furnace up and running in no time!

Request your service today!

Our team of highly trained technicians are standing by ready to help you out with all of your service, repair, and installation needs. You can count on us for on-time repairs, professional installation, and the friendliest customer service in town!

Contact Rep-Air Heating & Cooling today to get started with service by requesting a quote online, or by phone at (833) 487-2653.

Request Service

Contact us today to request an estimate or schedule service.


Schedule Service


We Aren't Comfortable Until You Are!

When your comfort is the concern, you can count on Rep-Air Heating & Cooling! Contact us today to schedule your service or request a free estimate. 

Rep-Air Logo

34510 Gill Ave Unit #206,
Mission, British Columbia, V4S 0A1, Canada

Connect With Us On Social Media!

© 2022 Rep-Air Heating and Cooling | All Rights Reserved.